Buckeye EAF Bracket for Redcat 51 and 71 Supply

Description
Buckeye Stargazer ZWO EAF Mount for William Optics Redcat
his bracket allows you to mount a ZWO Electronic Automatic Focuser (EAF) Â onto your William Optics Redcat telescope.
The drive system is belt driven and results in zero additional backlash. Â See the autofocus image. Â You will notice that the V-curve is very symmetrical and the V is nice and sharp. This means the backlash is very low and any backlash is likely from the EAF itself.
The side opposite the EAF has a standard Synta shoe saddle for mounting additional accessories such as an ASIAir or Pegasus Powerbox etc. Â
Redcat 51 notes :  The bracket can be mounted with or without the top handle and different length mounting screws are provided.  The design also allows the bracket to remain on the scope even when the dew shield is reversed, covering the rubber grip for transport. Â
Technical Specifications
Printed in durable, temperature tolerant PETG filament.
REDCAT 51 VERSION NOTE: There have been 3 versions of the Redcat 51. The original (V1) had two threaded mounting holes on the side of the scope ring. The later two versions (V1x and V2) have 4 threaded holes on the top of the scope ring. This bracket will work with V1x and V2. A bracket for the Redcat 51 V1 is available upon request
Â
In the Box
The EAF-Redcat51 package includes:
- 3D printed EAF Redcat Bracket
-
- 3D printed EAF pinion pulley
-
- Belt
-
- 2x M4x16mm flat head mounting screws
-
- 2x M4x10mm pan head mounting screws
-
- 2x M4x16mm pan head mounting screws
-
- 2x M4x20mm pan head mounting screws
-
The EAF-Redcat71 package includes:
- 3D printed EAF Redcat Bracket
-
- 3D printed EAF pinion pulley
-
- Belt
-
- 2x M6x12mm button head mounting screws
-
- 2x M4x10mm pan head mounting screws
-
Manuals & Warranty
EAF-Redcat51 Installation Instructions
EAF-Redcat71 Installation Instructions
Â
The EAF-Redcat51 package includes:
- 3D printed EAF Redcat Bracket
-
- 3D printed EAF pinion pulley
-
- Belt
-
- 2x M4x16mm flat head mounting screws
-
- 2x M4x10mm pan head mounting screws
-
- 2x M4x16mm pan head mounting screws
-
- 2x M4x20mm pan head mounting screws
-
The EAF-Redcat71 package includes:
- 3D printed EAF Redcat Bracket
-
- 3D printed EAF pinion pulley
-
- Belt
-
- 2x M6x12mm button head mounting screws
-
- 2x M4x10mm pan head mounting screws
-
Manuals & Warranty
EAF-Redcat51 Installation Instructions
EAF-Redcat71 Installation Instructions
Â
- 3D printed EAF Redcat Bracket
- 3D printed EAF pinion pulley
- Belt
- 2x M4x16mm flat head mounting screws
- 2x M4x10mm pan head mounting screws
- 2x M4x16mm pan head mounting screws
- 2x M4x20mm pan head mounting screws
-
- 3D printed EAF Redcat Bracket
- 3D printed EAF pinion pulley
- Belt
- 2x M6x12mm button head mounting screws
- 2x M4x10mm pan head mounting screws
-
Manuals & Warranty
EAF-Redcat51 Installation Instructions
EAF-Redcat71 Installation Instructions
Â
The EAF-Redcat71 package includes:
Additional Information
Redcat Model | Bracket Redcat 51, Bracket Redcat 71, Bracket Redcat 51 PLUS |
---|
flowsynapseus.shop © 2025 All Rights Reserved
- Image
- SKU
- Rating
- Price
- Stock
- Description
- Weight
- Dimensions
- Additional information
- Add to cart