Description

Pegasus Astro Mounting Solutions

Have you ever wanted to mount your Pegasus Pocket Powerbox, Powerbox Micro, Powerbox Advance, Ultimate Powerbox or USB Hub to a Losmandy or Vixen rail, Synta dovetail shoe etc?  Now you can with these diverse mounting solutions.  
The system consists of two parts:  a bracket for your Pegasus component and one of several different attachments.  

See Technical Specification for Compatibility

ATTENTION POWERBOX ADVANCE users:  Sometime between July 2020 and January 2021 Pegasus shipped Advance units that had a small machining error with the M3 threaded accessory holes on the RJ12 port side of the powerbox.  The holes were shifted upward 2mm from the bottom.  Please see the diagram below for the CORRECT hole pattern.  If your Advance has holes that are different than this please contact me after ordering and I will send a special bracket that fits. PLEASE CHECK YOUR ADVANCE BEFORE ORDERING.

Technical Specifications

Compatibility:

PPB-Bracket		Pegasus Pocket Powerbox Mounting Bracket
PPBMicro-Bracket		Pegasus Powerbox Micro Mounting Bracket.
PPBA-Bracket		Pegasus Powerbox Advance Mounting Bracket.
PUPBv1-Bracket		Pegasus Ultimate Powerbox (v1) Mounting Bracket.
PUPBv2a-Bracket		Pegasus Ultimate Powerbox (Original v2) Mounting Bracket.
PUPBv2b-bracket		Pegasus Ultimate Powerbox (Second v2) Mounting Bracket.
PUSBHub-Bracket		Fits the Pegasus USB Control Hub (note: only works with the saddle or bar attachments: eg. LSaddle, Synta-Bar-20mm.)
PEGUranus-Bracket		Fits the Pegasus Uranus Mateo Sensor

Attachment:

Attachments bolt onto the bracket and present several options:

LSaddle		Losmandy saddle that clamps onto Losmandy D dovetail bar
VSaddle		V-type saddle that clamps onto a Vixen dovetail bar
VBar		Vixen type bar that slips into a V-type clamp
ADM-MDS-Saddle		ADM Mini Dovetail System saddle that clamps onto a MDS dovetail bar
ArcaSwiss-Saddle		Arca-Swiss saddle that clamps onto an Arca-Swiss rail
ArcaSwiss-Bar		Arca-Swiss bar that slips into an Arca-Swiss clamp
Synta-Bar-20mm		Synta Vixen bar that slips into a Synta Vixen finder base, 20mm tall
Synta-Bar-50mm		Synta Vixen bar that slips into a Synta Vixen finder base, 50mm tall
MiniPC-NUC-85		Allows attachment of MiniPCs to an
MiniPC-NUC-94		Ultimate  or Advance Powerbox  bracket
MiniPC-Beelink-32		The numbers are the screw hole spacing on the MiniPC
MiniPC-Asus-85		MiniPC is bolted directly to the attachment
MiniPC-MeLEQ-80		MeLE Quieter 2 and 3 MiniPC Mounting Bracket, 80mm Hole Spacing
MiniPC-MeLEPCG35-75		MeLE PCG35 MiniPC Mounting Bracket, 75mm 100mm Hole Spacing
MiniPC-Giga-80		Gigabyte MiniPC Mounting Bracket, 80mm Hole Spacing

**Note: the MiniPC is bolted directly to the attachment with supplied M3x10mm screws

Note that Attachments can be oriented either direction.

Stacking Note:  If you intend to stack a MiniPC on top of a Powerbox Advance or Ultimate, you need to order two sets (bracket + attachment).  For example (1) PPBA-Bracket + LSaddle and (1) PPBA-Bracket + MiniPC-NUC-85.  

Pegasus Bracket	PPB, PPB-Micro, PPBA, PUPBv2 (a), PUPBv2 (b), PUPBv3, USBHub, Uranus
Attachement	LSaddle, VSaddle, VBar, ADM-MDS-Saddle, ArcaSwiss-Bar, Synta-Bar-20mm, MiniPC-NUC-85, MiniPC-NUC-94, MiniPC-Beelink-32, MiniPC-Asus-85, MiniPC-Giga-80, MiniPC-MeLEQ-80, MiniPC-MeLEPCG35-75